This item number 00438574 is only available until 31/12/19.
Please contact us regarding a successor product.
The type 2508 is only available until 31/12/19.
Plug for the connection of electrical components according to DIN EN 175301-803 (previously DIN 43650, Form A). Standard version without circuit, with LED, varistor, rectifier, pole protection- or/and free wheeling diode. Variants with HL-circuit to increase performance of solenoid valves, LR-circuit to decrease power consumption and IN-circuit for control of impulse coils.
- Commodity Codes
|Product sub-group||Cable plug|
|Plug pattern||Form A according to DIN EN 175301-803|
|Flat seal material||NBR (Nitrile rubber)|
|Plug mounting screw||stainless steel|
|Connector with LED||No|
|Connector with varistor||No|
|Connector with rectifier||No|
|Connector with polarity protection||No|
|Connector with recovery diode||No|
|Connector with recovery diode redundant||No|
|Connector with Kick and Drop electronics||No|
|Connector with Kick and Drop electronics with switching point detection||No|
|Connector with drop-off electronics||No|
|Connector with 3 to 2 conductor technology for pulse solenoids||No|
|Cable plug without ciruit||No|
|Electrical connection polarity||Irrelevant|
|Protection type (IP max. with suitable connector)||IP65|
|Voltage / rated voltage||0||V|
|Voltage / rated voltage||250||V|
|Electrical connection output direction||bottom|
|Electrical connection outlet||angled (90°)|
|Electrical connection wire diameter min||6||mm|
|Electrical connection wire diameter max||7||mm|
|Electrical connection protective conductor||Yes|
|Electrical connection number of contacts||2 + Grounding conductor|
|Temperature environment min||-40||°C|
|Temperature environment max||55||°C|