Share via email
Some fields are missing
send eMail
delivery truck
Free shipping

We deliver free of charge for orders over SGD 500 (local delivery).

Speech bubbles
Do you have questions?

 Consulting

 E-Mail

 

    Type 8025 - Insertion flowmeter or batch controller with paddle wheel and flow transmitter or remote batch controller

    Type Description

    Device Type 8025 is specially designed for use in neutral or mildly aggressive, particle-free liquids. The device is supplied as a flowmeter or batch controller, in a compact variant with paddle wheel sensor or in a remote variant. Bürkert’s proprietary fitting system permits simple installation of the compact device into pipelines with a nominal diameter between DN 20 and DN 400. The compact flowmeter is available with a standard signal output or without output (battery-operated display/totaliser). Remote devices (flow transmitters or batch controllers) intended for wall mounting or fitting inside a control cabinet must either be connected to a Bürkert flowmeter Type 8020, Type 8031, Type 8041 or Type SE30+S077, or to a flowmeter with open collector output, reed relay output, TTL, CMOS or solenoid.

    • Up to PN 10, measurement tube size DN 06 to DN 400
    • Display for showing the flow rate and volume with two totalisers, or dosing
    • Automatic calibration via teach-in
    • Inputs (with batch controller) and all outputs can be checked without the need for actual flow
    • Overall total and daily total for batch quantity and number of batches, volume or mass totalisers displayed (with batch controller)

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Type 8025 data sheet | Digital Insertion flowmeter or batch controller 1.5 MB EN / EU
    DTS Type S020 data sheet | Insertion fitting for flow or analytical measurement 2.2 MB EN / EU
    DTS Type 8025 data sheet | Region GB | single or multi batch controller system 98.1 kB EN / GB
    DTS Typ 8025 Datenblatt | Digitales Insertion-Durchflussmessgerät oder -Dosiergerät 1.5 MB DE / DE
    DTS Typ S020 Datenblatt | Insertion-Fitting für Durchfluss-/Analysemessungen 2.2 MB DE / DE
    DTS Type 8025 fiche technique | Débitmètre ou appareil de dosage Insertion numérique 1.5 MB FR / FR
    DTS Type S020 fiche technique |Raccord Insertion pour les mesures de débit ou d'analyse 2.2 MB FR / FR
    DTS 資料表 | 8025 型 | 插入式流量測量設備或帶渦輪和流量變送器的計量設備或分體式計量設備 3.1 MB ZH / HK
    DTS FICHA DE DADOS | Tipo 8025 | Medidor de vazão INSERTION comdosador transmissor 3.4 MB PT / BR
    DTS FICHA TÉCNICA | Tipo 8025 | Caudalímetro Insertion con hélice y transmisor 3.4 MB ES / ES
    DTS FICHA TÉCNICA | Tipo S020 | Racor Insertion para medicionesde caudal o analíticas 3.3 MB ES / ES

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Assembly Instructions Type 8025 Standard | With and without relais 403.2 kB EN / EU
    MAN Mounting Instructions SET8 | Replacing the finger gasket 83.4 kB EN / EU
    MAN Operat. Instr. Type 8025 8035 SE35 | Insertion/Inline flowmeter/Flow transm.,w. batteries 2.1 MB EN / EU
    MAN Operating Instructions Type 8025 8035 SE35 BATCH | Batch controller 7.6 MB EN / EU
    MAN Operating Instructions Type 8025 8035 SE35 | Insertion or Inline flowmeter / transmitter 6.2 MB EN / EU
    MAN Operating Instructions Type 8025 UNIVERSAL | Flow transmitter 3.8 MB EN / EU
    MAN Operating Instructions Type S020 | Insertion fitting 1.3 MB EN / EU
    MAN Replacement instructions | Electronic board 891.2 kB EN,FR,DE / EU
    MAN Replacement instructions | Powwer sypply board 426.3 kB EN,FR,DE / EU
    MAN 타입 8025 - 8035 - SE35 | 유량계 -유량 트랜스미터 6.1 MB KO / KR
    MAN Bedienung Typ 8025 8035 SE35 | Insertion- oder Inline-Durchflussmesser / -transmitter 6.2 MB DE / DE
    MAN Bedienungsanleitung Typ 8025 8035 SE35 BATCH | Dosiergerät 7.6 MB DE / DE
    MAN Bedienungsanleitung Typ 8025 8035 SE35 | Durchfluss-Messer/Transmitter mit Batterien 2.2 MB DE / DE
    MAN Bedienungsanleitung Typ 8025 UNIVERSAL | Durchflusstransmitter 3.9 MB DE / DE
    MAN Bedienungsanleitung Typ S020 | Insertion Fitting 1.4 MB DE / DE
    MAN Instructions de montage SET 8| Remplacement du joint du doigt 83.7 kB FR / FR
    MAN Istruzioni d'uso Tipo 8025 - 8035 - SE35 | Misuratore di portata - Trasmettitore di portat 6 MB IT / IT
    MAN Manual de operação Tipo 8025 - 8035 - SE35 | Medidor de vazão - Transmissor de vazão 6.3 MB PT / BR
    MAN Manuel d'utilisation Type 8025 8035 SE35 BATCH | Contrôleurde dosage 7.6 MB FR / FR
    MAN Manuel d'utilisation Type 8025 8035 SE35 | Débitmètre Insertion ou Inline/Transm. de débit 6.2 MB FR / FR
    MAN Manuel d'utilisation Type 8025 UNIVERSAL | Transmetteur de débit 3.8 MB FR / FR
    MAN Manuel d'utilisation type 8025 8035 SE35 | Débitmètre/Transmetteur de débit à piles 2.2 MB FR / FR
    MAN Manuel d'utilisation type S020 | Raccord à insertion 1.4 MB FR / FR
    MAN Montagehinweise SET8 | Wechseln des Finger-O-Rings 83.7 kB DE / DE
    MAN 取扱説明書 タイプ S020 | ねじ接続の挿入 1.5 MB JA / JP
    MAN 操作説明書 タイプ 8025 バッチ | バッチコントローラ 6.7 MB JA / JP
    MAN 操作説明書 タイプ 8025 | 流量計 – 流量発信機 5.5 MB JA / JP
    MAN 타입 S020 | 사용 설명서 | 삽입형 피팅 1.4 MB KO / KR
    MAN Driftsinstruktion Typ S020 |Insertionsskruvförband 1.9 MB SV / SE
    MAN Manual de usuario Tipo 8025 | Caudalímetro de rueda de aletas/dosificador Insertion 690.1 kB ES / ES
    MAN Manual de usuario Tipo 8025 | Caudalímetro de rueda de aletas/dosificador Insertion 981.2 kB ES / ES

    Declaration of Conformity

    Description
    Filesize
    Language / Country
    ABD MDec|Food 8025-xxxx-PDFF/PDAA version 232.5 kB ML
    ABD EU-DoC|EU Declaration 34.7 kB EN,FR,DE